DISC SCREEN

Product Detail:

DISC SCREEN

For the separation of overlengths

Disc screens by Bootec are suitable for the separation of oversized particles from the material flow. For example, it is possible to separate oversized particles in biomass transport at minimum space requirements and energy input. Disc screens are characterized by their high screening/throughput rate as well as ease of maintenance.

With a highly diverse range of sizes and designs, Rudnick & Enners disc screens can be individually adapted to customers’ requirements. Bolted disc segments increase the ease of maintenance and can even be retrofitted if material properties or requirements change.

The light version of the disc screener is particularly efficient at separating overlengths from single materials such as dry stabilate (clean fuel for power plants, etc. derived from domestic waste), bark, green waste and fresh wood.

FULL RANGE OF SIZES & CONFIGURATIONS

Highly efficient and cost-effective for high volume coarse screening applications

Increase throughput and reduce Grinder maintenance by removing overs, chunks, splinters, and trash

Low speed, smooth operation eliminates the need for special support structures or foundations

Agitation action of discs improves screening efficiency

Modular side sheets allow for quick and easy maintenance access

Central lubrication station makes it easy to service

Solid through, large diameter shaft assemblies contribute to a long operating life

WSM’S DISC SCREENS ARE AN EFFICIENT AND COST EFFECTIVE CHOICE FOR HIGH VOLUME, COARSE SCREENING APPLICATIONS.

- WSM Disc Screens operate by accepting material from an infeed device

- As material slides down the chute, smaller material (“fines”) fall through the disc openings

- Later material (“overs”) is transported to the end of the screen and transported to the end of the screen

- “Overs” can be discharged into a Grinder, Hog, Hammermill, No-Knife Re-Sizer, or reject conveyor

MATERIALS PROCESSED

Bark

Biomass Feed-stock

C&D Debris

Compost

Hog Fuel

Mulch

Paper/OCC

Plastics

RDF

Sawdust/Shavings

Shredded Tires

Slab wood

Urban Wood

Wood Chips

STANDARD & OPTIONAL FEATURES

Disc Profile: Various disc profiles are available to meet specific application needs

Orientation Rolls provide tight disc spacing on initial rotors to transition infeed material on to the main screen area

Anti-jam Control: Detects jam up though current sensing on drive motor. Provides controls to reverse and clear the jam automatically

Motion Switch: Detects motion and zero speed conditions

Top Covers: Provides enclosure over to of screen for dust control and safety purposes

SELECTION & TECHNICAL QUESTIONS

Q1: How do I select the right conveyor model? What information should I provide?

> To recommend the most suitable solution, please provide the following details:

> 1. Material type: What material are you conveying? (e.g., fly ash, wood chips, biomass pellets, bottom ash, etc.)

> 2. Material properties: Particle size, temperature, moisture content, abrasiveness

> 3. Capacity requirement: How many tons per hour (t/h) do you need?

> 4. Installation conditions: Conveying distance, incline angle, space limitations

> 5. Application industry: Which industry is this for? (e.g., waste-to-energy plant, biomass power plant, cement plant)

> You can also email us or contact us via WhatsApp. Our engineers will get back to you within 24 hours.

Q2: What is the difference between screw conveyors and chain conveyors? Which one should I choose?

> Both types have different applications:

> – Screw Conveyors: Best for powdery and small-grain materials (e.g., fly ash, cement powder). Good sealing performance, simple structure, low maintenance cost.

> – Chain Scraper Conveyors: Best for bulky, highly abrasive materials (e.g., bottom ash, municipal solid waste, biomass fragments). Supports multiple inlet and outlet points.

> – Bucket Elevators: Ideal for vertical or steep-incline material lifting.

> If you are not sure, tell us your material and working conditions, and our engineers will help you choose.

Q3: Can your equipment handle high-temperature materials? What is the maximum temperature?

> We can customize equipment according to material temperature:

> – Standard type: 0~80°C, carbon steel

> – Medium temperature type: 80~200°C, thickened wear-resistant liner

> – High temperature type: 200~400°C, special heat-resistant steel, optional cooling jacket

> Please tell us your material temperature, and we will recommend the most suitable material solution.

Q4: Are there any limits on conveying distance and lifting height?

> Standard design range:

> – Screw conveyor: Single section up to 70 meters; multiple sections can be connected for longer distances

> – Chain conveyor: Single machine up to 60 meters

> – Bucket elevator: Lifting height up to 50 meters

> We can also customize for extra-long distances or special angles. Contact us for detailed solutions.

Q5: Do you provide explosion-proof design?

> Yes. For explosive and flammable conditions such as pulverized coal and biomass dust, we offer:

> – Explosion-proof motors (Ex d IIB T4 standard)

> – Reserved openings for explosion vents / rupture discs

> – Fully sealed structure to prevent dust leakage

> Please specify your explosion-proof rating requirements.

CUSTOMIZATION & MANUFACTURING

Q6: Do you support customization? What is the lead time?

> Over 90% of our equipment is customized according to customer working conditions. Standard models take about 90–120days. Special customizations take 120–180 days, depending on configuration complexity.

Q7: What material options do you offer?

> Common materials include:

> – Carbon steel (Q235B): Standard working conditions

> – Wear-resistant steel (NM400/NM500): Highly abrasive materials

> – Stainless steel 304/316L: Food, chemical, corrosion-resistant requirements

> – Bi-metal wear-resistant composite plate: Extreme abrasion conditions

> We will recommend the most cost-effective material solution based on your material properties.

Q8: What certifications do you have?

> We hold the following certifications:

> – ISO 9001:2015 Quality Management System

> – ISO 14001 Environmental Management System

> – ISO 45001 Occupational Health & Safety Management

> – CE Certification (EN 1090 Steel Structure)

> If you need scanned copies of specific certificates, please contact us.

DELIVERY & LOGISTICS

Q9: Which countries do you export to? Do you have export experience?

> Our equipment has been exported to more than 20 countries worldwide, including:

> – Europe: Germany, France, Poland, Turkey, etc.

> – Southeast Asia: Singapore, Thailand, Indonesia, Vietnam, etc.

> – Middle East: Saudi Arabia, UAE, etc.

> – South America**: Brazil, Chile, etc.

> We are familiar with the full export process: packaging, customs declaration, and ocean freight. We can provide FOB, CIF, and other trade terms.

Q10: What is your packaging method? Is it suitable for long-distance ocean shipping?

> Export-standard packaging:

> – Large items / complete machines**: Rust prevention + waterproof film + fumigated solid wood pallet

> – Precision components: Wooden case with shock-absorbing filling

> – Random accessories: Categorized packing with detailed packing list

> All wooden packaging meets IPPC fumigation standards for direct customs clearance.

Q11: What is your minimum order quantity?

> We do not have a strict minimum order quantity. Single-unit orders are welcome. Bulk orders can enjoy more favorable pricing.

INSTALLATION & AFTER-SALES

Q12: Do you provide installation guidance? Do engineers need to come to site?

> We offer two service options:

> 1. Remote guidance: Detailed installation drawings and operation manuals, video guidance for installation (free of charge)

> 2. On-site service: Dispatch engineers to site for installation and commissioning (travel costs are additional)

> Most customers choose remote guidance. Our equipment is designed as a modular structure for easy installation.

Q13: What is the warranty period? What are the wearing parts?

> Standard warranty period is 12 months (from the date of arrival at port).

> Wearing parts list:

> – Chain / screw flights: Approximately 1–3 years, depending on material abrasiveness

> – Liners: Approximately 2–4 years

> – Bearings: Approximately 2–3 years

> We recommend ordering a wearing-parts spare kit together with your first order.

Q14: How do you solve problems during operation?

> We provide 7×24 technical support:>

> – Response within 24 hours for technical issues

> – Remote video troubleshooting guidance

> – Engineer on-site service when necessary

> – Common spare parts in stock for fast delivery

QUOTATION & COOPERATION

**Q15: How can I get a quote? How long does it take?

> Quotation process:

> 1. You provide material parameters, capacity, installation conditions, and other requirements

> 2. Our engineers evaluate and select the appropriate model

> 3. Formal quotation and technical proposal provided within 7 working days

> You can contact us via email, or the online inquiry form.

Q16: What are your payment terms?

> Standard payment terms:

> – 30% advance payment: After contract signing, to start production

> – 70% balance: Before shipment, or against copy of Bill of Lading

For long-term cooperative customers, more flexible payment terms can be negotiated.

Follow these 3 steps to find your ideal conveyor solution

Step 1: Identify Your Material Type

Different materials require different conveyor designs. Tell us what you are conveying:

Step 2: Define Your Working Conditions

Please prepare the following parameters before contacting us:

Step 3: Choose Configuration Options

Based on your answers above, our engineers will recommend:

Material grade — carbon steel / wear-resistant steel / stainless steel

Sealing type — open trough / fully enclosed / gas-tight

Drive system — motor power, gearbox brand, speed range

Auxiliary options — explosion-proof motor, cooling jacket, cleaning device, level sensors

 Not Sure Where to Start?

Send us your basic requirements, and our engineers will design a customized solution for you — completely free.

Email: bootec@bootecgroup.com  Response time: Within 24 hours

[REQUEST A FREE QUOTATION →]