Ne Series Bucket Elevator for Bottom Ash in Power Plant

Short Description:

Chain Bucket Elevator | Bucket Elevator Manufacturer

1.NE series plate chain bucket elevator is suitable for conveying powdery, granular, small abrasive or non-abrasive materials, such as raw meal, cement, coal, limestone, dry clay, clinker, etc., the material temperature Control below 250°C.

2.This series of elevators adopts inflow feeding and induction unloading; the material flows into the hopper and is lifted to the top by the plate chain, and unloads automatically under the action of material gravity.
3. NE type plate chain bucket elevator is a new type of lifting product developed by introducing foreign advanced technology

Send email to us

Product Detail

Product Tags

Ne Series Bucket Elevator for Bottom Ash in Power Plant

Bootec is a leading bottom ash handling equipment manufacturer in China which provides a full set of bottom ash handling equipment for both CFB and PC boiler coal fired power plants, as well as a full set of biomass ash handling equipment.

chain bucket conveyor is a kind of equipment which transports materials horizontally or obliquely with the bucket running along the track.It is widely used in power station, mine, metallurgy, coal and other industries to transport various loose materials, such as boiler ash, cement clinker, iron slag, slag, limestone, coke, gravel, etc., especially some of them with high temperature, large capacity, large block degree, sharp angle and strong abrasiveness transportation of materials.

Introduction

NE Plate Chain Bucket Elevator adopt advanced technology from domestic and abroad. This product suitable for vertical conveying powder, granular, bulk and abrasive materials, such as limestone, coal, proppant sand, gravel and so on. Material temperator can not be higher than 200℃ and max lifting can not be more than 40m. block materials, and also for large abrasion material.

Application:

Widely used in construction, power, metallurgy, machinery, chemical, mining industry and so on. The temperature of material is below 200℃usually, the height can be reach to 40 meters. NE type bucket elevator adopt flow-through loading, reducing the bucket wearing from material efficiency. Improve the performance of bucket elevator.

Features

1. Large scope of elevate: not only elevate common powder, particle and block materials, but also can elevate large abrasion materials;

2. Small power for driving, low energy consumption, save energy effective; compare with roller chain bucket elevator, if elevate same material to same height, energy consume is around 1/3-1/2;

3. Adoption complete sealing design, there is no dust pollution during operation;

4. Shell with indent structure , strong rigidity, high precise, nice appearance.

Technical Parameter

Model	Max Elevation Capacity (m³/h)	Power (kW)	Elevation Height (density0.6~2.0t/m³)
NE15	16	1.5-4.0	6.28-30.78
NE30	31	1.5-11	4.13-47.63
NE50	60	1.5-18.5	4.13-49.13
NE100	110	5.5-30	6.65-49.15
NE150	165	5.5-45	6.10-52.60
NE200	220	15-75	5.73-47.23
NE300	320	15-90	4.23-54.73
NE400	441	15-132	12.6-54.7