NE Plate Chain Bucket Elevator

Short Description:

Chain Bucket Elevator | Bucket Elevator Manufacturer

1.NE series plate chain bucket elevator is suitable for conveying powdery, granular, small abrasive or non-abrasive materials, such as raw meal, cement, coal, limestone, dry clay, clinker, etc., the material temperature Control below 250°C.

2.This series of elevators adopts inflow feeding and induction unloading; the material flows into the hopper and is lifted to the top by the plate chain, and unloads automatically under the action of material gravity.
3. NE type plate chain bucket elevator is a new type of lifting product developed by introducing foreign advanced technology

Send email to us

Product Detail

Product Tags

Ne Series Bucket Elevator for Bottom Ash in Power Plant

Bootec is a leading bottom ash handling equipment manufacturer in China which provides a full set of bottom ash handling equipment for both CFB and PC boiler coal fired power plants, as well as a full set of biomass ash handling equipment.

chain bucket conveyor is a kind of equipment which transports materials horizontally or obliquely with the bucket running along the track.It is widely used in power station, mine, metallurgy, coal and other industries to transport various loose materials, such as boiler ash, cement clinker, iron slag, slag, limestone, coke, gravel, etc., especially some of them with high temperature, large capacity, large block degree, sharp angle and strong abrasiveness transportation of materials.

Introduction

NE Plate Chain Bucket Elevator adopt advanced technology from domestic and abroad. This product suitable for vertical conveying powder, granular, bulk and abrasive materials, such as limestone, coal, proppant sand, gravel and so on. Material temperator can not be higher than 200℃ and max lifting can not be more than 40m. block materials, and also for large abrasion material.

Application:

Widely used in construction, power, metallurgy, machinery, chemical, mining industry and so on. The temperature of material is below 200℃usually, the height can be reach to 40 meters. NE type bucket elevator adopt flow-through loading, reducing the bucket wearing from material efficiency. Improve the performance of bucket elevator.

Features

1. Large scope of elevate: not only elevate common powder, particle and block materials, but also can elevate large abrasion materials;

2. Small power for driving, low energy consumption, save energy effective; compare with roller chain bucket elevator, if elevate same material to same height, energy consume is around 1/3-1/2;

3. Adoption complete sealing design, there is no dust pollution during operation;

4. Shell with indent structure , strong rigidity, high precise, nice appearance.

Technical Parameter

Specifications

Model	Capacity m3/h	Bucket			The largest size of material
		Volume L	Bucket pitch mm	Chain speed m/min	Percentage of %
		Volume L	Bucket pitch mm	Chain speed m/min	10	25	50	75	100
NE15	15	2.7	203.2	29.8	65	50	40	30	25
NE30	31	7.9	304.8	30.1	90	75	58	47	40
NE50	60	15.1	304.8	30.1	90	75	58	47	40
NE100	110	36.4	400	31	130	105	80	65	55
NE150	165	54.6	400	31	130	105	80	65	55
NE200	220	91	500	30	170	135	100	85	70
NE300	320	132.3	500	30	170	135	100	85	70
NE400	440	218.4	600	30	205	165	125	105	90
NE500	470	260.9	700	30	240	190	145	120	100
NE600	600	300.2	700	30	240	190	145	120	100
NE800	800	501.8	800	30	275	220	165	135	110